I-D ACTION:draft-fair-ipdvb-ar-04.txt

[Gorry Fairhurst <gorry@erg.abdn.ac.uk>]

A New Internet-Draft is available from the on-line Internet-Drafts directories.


        Title           : Address Resolution for IP datagrams over
                          MPEG-2 networks
        Author(s)       : G. Fairhurst, et al.
        Filename        : draft-fair-ipdvb-ar-04.txt
        Pages           : 17
        Date            : 2005-4-12

This document describes the process of binding/associating IPv4/IPv6
   addresses with MPEG-2 Transport Streams (TS). This procedure is
   known as Address Resolution (AR), or Neighbour Discovery (ND). Such
   address resolution complements the higher layer resource discovery
   tools that are used to advertise IP sessions. In MPEG-2 networks, an
   IP address must be associated with a Packet ID (PID) and a specific
   Transmission Multiplex The document reviews current methods. It also
   describes the interaction with well-known protocols for address
   management including DHCP, ARP, and NDP, and provides guidance on
   usage.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-fair-ipdvb-ar-04.txt

To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request at ietf.org with the word unsubscribe in the body of the 
message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.


Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
        "get draft-fair-ipdvb-ar-04.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
        mailserv at ietf.org.
In the body type:
        "FILE /internet-drafts/draft-fair-ipdvb-ar-04.txt".

NOTE:   The mail server at ietf.org can return the document in
        MIME-encoded form by using the "mpack" utility.  To use this
        feature, insert the command "ENCODING mime" before the "FILE"
        command.  To decode the response(s), you will need "munpack" or
        a MIME-compliant mail reader.  Different MIME-compliant mail readers
        exhibit different behavior, especially when dealing with
        "multipart" MIME messages (i.e. documents which have been split
        up into multiple messages), so check your local documentation on
        how to manipulate these messages.


Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.

<ftp://ftp.ietf.org/internet-drafts/draft-fair-ipdvb-ar-04.txt>