[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Subject: I-D ACTION:draft-clausen-ipdvb-enc-00.txt
- To: ip-dvb@erg.abdn.ac.uk
- Subject: Re: Subject: I-D ACTION:draft-clausen-ipdvb-enc-00.txt
- From: Patrick Cipiere <Patrick.Cipiere@udcast.com>
- Date: Wed, 24 Apr 2002 15:35:31 +0200
- In-reply-to: <> (message from Dr G Fairhurst on Wed, 24 Apr 2002 13:54:51 +0100)
Gorry wrote:
> Just to be sure... A small payload will normally be padded to the
> Ethernet Minimum frame size - this involves sending padding bytes to
> make the frame >= 64B (incl 4B FCS).
Got the point.
My understanding: the padding is only needed at the physical layer, so
I think in our design there is no use to add padding because in this
case ethernet is not at the physical layer.
mpeg2, MPE and the new design will have their own padding if needed.
Patrick.
--
UDcast: Full IP over Broadcast Media
Phone: (+33) (0)4 93 00 16 99
Mobile: (+33) (0)6 14 21 55 98
Fax: (+33) (0)4 93 00 16 61 http://www.UDcast.com